Filter for Mixing Tank

Oil absorbent / filter

Features:

1. OIL CATCHER is made from highly absorbent polypropylene.
2. It selectively absorbs or filters ink and other oil.
3. It is very light and can float on water. Easy to collect after use.
4. Can store for extended periods without quality deterioration.

Performance:

5 cm x 15 cm OIL CATCHER sheets were dipped into each of the following oils for 30 seconds except one with C heavy oil for 1 minute and another for 2 minutes. Then, the increase in weight was calculated. Room temperature was 25 degrees Celsius.

Applications:

• Do not leave under the sun or other strong light source. If this microscope focuses the light, the focused light may set fire.
• Do not look directly at the sun or other strong light source, with this microscope. This may cause eye damage.
• Using a broken unit may cause injury. Failed unit may cause injury.
• Unit, especially lens, may get damaged if not kept in dry and ventilated place.

Applications:

For Printing Industry
• Use as a filter in the mixing tank and the water circulation systems.
• Float as an absorbent in the mixing tank
• Use as an floor mat on the floor where oil or ink is spilled, etc.

For Other industries
• Use as a filter.
• Use as an absorbent to absorb floating oils on industrial waste water.
• Use as a floor mat or absorbent where machine oil is spilled, etc.

Usage Instructions:
• Generally, offset inks have viscosities between 300-500C.P.
• On average, 1 square meter of ES-100 is capable of absorbing 6 liters of oil in 3 minutes. Originally, this material was designed to prevent accidents by stopping the spread of oil from an oil tanker. Therefore, it has outstanding absorbing capacities..
• The material itself will not break poisonous gasses out if it is destroyed by fire.

Product lineup